Tampilkan postingan dengan label Science. Tampilkan semua postingan
Tampilkan postingan dengan label Science. Tampilkan semua postingan

12 Juni 2009

20 quick ways to increase your alexa rank

0 komentar
It is important to emphasize that you should devote most of your efforts in growing your site audience alongside integrated implementation of any of the following tips below.
1. Install the Alexa toolbar or Firefox’s SearchStatus extension and set your blog as your homepage. This is the most basic step.
2. Put up an Alexa rank widget on your website. I did this a few days ago and receive a fair amount of clicks every day. According to some, each click counts as a visit even if the toolbar is not used by the visitor.
3. Encourage others to use the Alexa toolbar. This includes friends, fellow webmasters as well as site visitors/blog readers. Be sure to link to Alexa’s full explanation of their toolbar and tracking system so your readers know what installing the toolbar or extension entails.
4. Work in an Office or own a company? Get the Alexa toolbar or SS Firefox extension installed on all computers and set your website as the homepage for all browsers. Perhaps it will be useful to note that this may work only when dynamic or different IPs are used.
5. Get friends to review and rate your Alexa website profile. Not entirely sure of its impact on rankings but it might help in some way.
6. Write or Blog about Alexa. Webmaster and bloggers love to hear about ways to increase their Alexa rank. They’ll link to you and send you targeted traffic (i.e. visitors with the toolbar already installed). This gradually has effects on your Alexa ranking.
7. Flaunt your URL in webmaster forums. Webmasters usually have the toolbar installed. You’ll get webmasters to visit your website and offer useful feedback. It’s also a good way to give back to the community if you have useful articles to share with others.
8. Write content that is related to webmasters. This can fall in the category of domaining and SEO, two fields in which most webmasters will have the Alexa toolbar installed. Promote your content on social networking websites and webmaster forums.
9. Use Alexa redirects on your website URL. Try this: http://redirect.alexa.com/redirect?www.doshdosh.com . Replace doshdosh.com with the URL for your website. Leave this redirected URL in blog comments as well as forum signatures. This redirect will count a unique IP address once a day so clicking it multiple times won’t help. There is no official proof that redirects positively benefit your Alexa Rank, so use with caution.
10. Post in Asian social networking websites or forums. Some webmasters have suggested that East Asian web users are big Alexa toolbar fans, judging by the presence of several Asia-based websites in the Alexa Top 500. I suggest trying this only if you have the time or capacity to do so.
11. Create a webmaster tools section on your website. This is a magnet for webmasters who will often revisit your website to gain access to the tools. Aaron Wall’s webpage on SEOTools is a very good example.
12. Get Dugg or Stumbled. This usually brings massive numbers of visitors to your website and the sheer amount will have a positive impact on your Alexa Rank. Naturally, you’ll need to develop link worthy material.
13. Use PayperClick Campaigns. Buying advertisements on search engines such as Google or Exact Seek will help bring in Traffic. Doubly useful when your ad is highly relevant to webmasters.
14. Create an Alexa category on your blog and use it to include any articles or news about Alexa. This acts as an easily accessible resource for webmasters or casual search visitors while helping you rank in the search engines.
15. Optimize your popular posts. Got a popular post that consistently receives traffic from the search engines? Include a widget/graph at the bottom of the post, link to your Alexa post or use Alexa redirection on your internal URLs.
16. Buy banners and links for traffic from webmaster forums and websites. A prominent and well displayed ad will drive lots of webmaster traffic to your website, which can significantly boost your rank.
17. Hire forum posters to pimp your website. Either buy signatures in webmaster forums or promote specific articles or material in your website on a regular basis. You can easily find posters for hire in Digital Point and other webmaster forums.
18. Pay Cybercafe owners to install the Alexa toolbar and set your website as the homepage for all their computers. This might be difficult to arrange and isn’t really a viable solution for most. I’m keeping this one in because some have suggested that it does work.
19. Use MySpace . This is a little shady so I don’t recommended it unless you’re really interested in artificially inflating your Alexa Rank. Use visually attractive pictures or banners and link them to your redirected Alexa URL. This will be most effective if your website has content that is actually relevant to the MySpace Crowd.
20. Try Alexa auto-surfs. Do they work? Maybe for brand new sites. I think they are mostly suitable for new websites with a very poor Alexa rank. Note that there be problems when you try to use auto surfs alongside contextual ads like Adsense. They aren’t also long term solutions to improving your Alexa Rank so I suggest using with caution.
Read More..

Step by step Install Asterisk Server

1 komentar
1. using an iso image 'AsteriskNOW' to install the whole package with linux OS
http://www.asterisknow.org/
We can find the documents and download the lastest version from their website. After installing AsteriskNOW step by step to a machine, we can configure it by any web browser, only need to remember the URL, ID, and password.

2. self install on linux machine (like Debian, Ubuntu, Fedora...etc)
we could reference to these documents
http://www.asteriskguru.com/tutorials/asterisk_gui.html
http://www.howtoforge.com/asterisk_pbx_linux
(1) create a working folder:
# mkdir /usr/src/asterisk
(2) download all needed packages
from website as below:
http://downloads.digium.com/pub/
(3) installing libpri
# wget http://downloads.digium.com/pub/libpri/libpri-1.4.2.tar.gz
# tar xzvf libpri-1.4.2.tar.gz
# cd libpri-1.4.2
# make clean
# make
# make install
(4) installing zaptel
# wget http://downloads.digium.com/pub/zaptel/zaptel-1.4.6.tar.gz
# tar xzvf zaptel-1.4.6.tar.gz
# make clean
# make
# make install
PS. if you met the problem like missing Linux kernel header file, you may download your Linux header
files:
# cat /proc/version
# apt-get install linux-headers-2.6.20-16-386
(5) installing asterisk
# wget http://downloads.digium.com/pub/asterisk/asterisk-1.4-current.tar.gz
# tar xzvf asterisk-1.4-current.tar.gz
# ./configure
# make clean
# make
# make install
(6) installing asterisk-addons
# wget http://downloads.digium.com/pub/asterisk/asterisk-addons-1.4.4.tar.gz
# tar xzvf asterisk-addons-1.4.4.tar.gz
# ./configure
# make clean
# make
# make install
(7) installing asterisk-gui
# svn checkout http://svn.digium.com/svn/asterisk-gui/trunk
# svn checkout http://svn.digium.com/svn/asterisk-gui/branches/2.0
# cd /usr/src/asterisk/2.0
# ./configure
# make
# make install
# langkah 8
# make checkconfig [it can detect all config file status ]
(8) modify 2 confiure files, then we can use astersik gui web interfaces
# vi /etc/asterisk/manager.conf
a. modifiy these two lines
enabled = yes
webenabled = yes
b. add a user
[administrator]
secret = 123456
read = system,call,log,verbose,command,agent,user,config
write = system,call,log,verbose,command,agent,user,config
# vi /etc/asterisk/http.conf
a. modify these lines
enabled=yes
enablestatic=yes
bindaddr= 0.0.0.0
bindport=8088
(9) use asterisk CPI prompt to execute shell commands
# asterisk -vvvvvr
erin-laptop*CLI> restart now (it will restart asterisk now)
(10) open a browser to verify asterisk
http://127.0.0.1:8088/asterisk/static/config/cfgbasic.html
http://127.0.0.1:8088/asterisk/static/config/cfgadvanced.html
Read More..

11 Juni 2009

Cara Menampilkan Kode HTML di Postingan

0 komentar
Mungkin di antara kita sering membuat atau menulis beberapa isi postingan blog dalam bentuk kode HTML namun setelah dilihat pada mode visual ternyata kode yang kita tulis tidak muncul di postingan. Bagaimana cara agar kode HTML tampil di postingan? Ada beberapa hal yang dapat kita lakukan untuk menampilkan kode HTML di halaman posting atau kode yang ditulis bisa nampak di posting blog kita.
Pertama kita perlu mengganti karakter HTML, maksudnya kita mesti mengganti kode yang sering kita gunakan pada penulisan. Contoh Tanda <> Anda ganti dengan >
Jadi, yang Anda ganti hanya kurung buka dan kurung tutupnya saja. Hal itu sudah mewakili seluruh kode HTML Anda
Cara yang kedua yaitu dengan menggunakan jasa dari Website Encode and Decode seperti centricle.com, di sini kita tinggal meng-copy and paste hasil dari encode atau decode dari websitenya ke postingan kita. Encode berarti mengubah ke bentuk notasi dan decode mengganti ke bentuk karakter HTML semula. Yang lain seperti accessify.com, Blogcrowds, dll.
Cara ketiga yaitu dengan memberinya kotak pada kode htmlnya. Kalo bahasa scriptnya namanya text area. Adapun untuk membuat kode text areanya adalah seperti contoh berikut:
<textarea rows="4" cols="55" name="code">
dan di akhiri dengan
< /textarea >
rows adalah jumlah baris yang diinginkan kalo diisi 4 brarti akan memuat 4 baris dan cols adalah jumlah kolom yang kita inginkan. kalo diisi 55 brarti panjang kolomnya seperti contoh kotak diatas. silahkan dikira2 mau diisi berapa yang kita inginkan. Untuk menuliskan kodenya letakkan sebelum kode: < /textarea >
Jangan lupa, sebelum menerbitkan postingannya, lihat dulu tampilan pratinjaunya. Caranya dengan meng-klik tulisan pratinjau di pojok kanan atas. Kalo pada saat kita terbitkan entri ada pesan kesalahan (html anda tidak diterima) silahkan di ceklist aja pada tulusan "berhenti menunjukkan kesalahan judul bla bla.." dan klik lagi "terbitkan entri"

Read More..

A simple trick to make yahoo messenger multi login

0 komentar
A simple trick to make yahoo messenger multi login you have 2 just make a little change in registry and your done.
1. click start button,then run and then type regedit

2. Then look for
HKEY_CURRENT_ USER
Software\yahoo\ pager\Test. then change this value of plural to like this
"Plural"=dword: 00000001
3. Now no need 2 restart
just enjoy
Read More..

Menambahkan Live Traffic Feed pada Blog

0 komentar
Live Traffic Feed dari situs life.feedjit.com diperlukan bagi sebuah blog yang berguna untuk mengetahui dari mana datangnya pengunjung ke blog yang kita kelola juga dapat mempercantik penampilan blog. Terdapat 2 widget utama yang dapat kita tambahkan pada blog, yang pertama berupa keterangan asal pengunjung dan apa yang dikunjunginya yang disertai dengan gambar bendera negara pengunjung. Yang kedua berupa tampilan peta dengan noktah berwarna merah berupa lokasi asal pengunjung. Jika pointer diarahkan kenoktah merah, akan mucul tulisan lokasi asal pengunjung blog.
Untuk anda yang ingin menambahkan kedua widget diatas, ikuti langkah-langkah berikut ini:
1. Kunjungi link : http://feedjit.com
2. Klik get feedjit setelah anda berada di situs tersebut
3. Klik salah satu pilihan Javascrift widget atau Image Widget.
Agar tidak terlalu berbelit-belit, kami memilihkan untuk anda yaitu klik Javasrift widget yang letaknya bagian bawah.
4. Pada halaman berikutnya anda akan melihat 4 tampilan widget. pilih salah satunya sesuai dengan keinginan anda.Tampilan warna dapat kita ubah dengan mengklik First Costumize it. setelah muncul kotak dialognya, silahkan anda pilih penampilan warna yang sesuai.
5. Selesai mengotak-atik warna, klik Add to your Blogger blog atau Typepad blog.
Blogger:Menambah Elemen Halaman akan muncul, silahkan anda masukan nama blog seta judul dari widget dan menambahkan kode lainnya, misal : pada edit konten tambahkan <> pada awal kode HTML dan < /center> pada akhir kode HTML agar widget berada ditengah-tengah sidebar.
6. Klik menambah widget.
Silahkan anda lihat blog anda sekarang
7. Untuk widget lainnya lakukan langkah-langkah seperti diatas.
Selamat mencoba...!!
Read More..

Membuat huruf berjalan di url

0 komentar
Anda ingin membuat nama blog atau keterangan blog anda terlihat berjalan di url???caranya cukup mudah, yaitu:
1. Ketik script di bawah ini

<script>
var pesan = &quot; || Meindra's Blog &quot;;
var speed = 200;
function the_free87()
{
document.title=pesan;
pesan=pesan.substring(1,pesan.length)+pesan.charAt(1);
setTimeout(&quot;the_free87()&quot;,speed);
}
the_free87();
</script>

2. Login pada blog anda
3. Pada layout pilih edit html
4. Cari <head> dan pastekan kode diatas tepat di bawah nya.
Selamat mencoba
Read More..

10 Juni 2009

Mengganti Icon Blogger pada Alamat Blog

0 komentar
Favicon atau Favourite icon merupakan icon kecil yang terlihat bagian samping kiri dari alamat blog. Bagi Blog yang memakai blogspot, iconnya berupa icon Blooger.
Icon tersebut dapat anda ganti dengan icon pilihan anda sendiri, tentu saja icon yang ingin ditampilkan adalah icon yang mewakili diri anda atau blog kesayangan anda.
Langkah-langkah mengganti Favicon
1. Siapkan sebuah image.
2 Ubahlah gambar tersebut menjadi gambar icon. Dalam hal ini anda dapat menggunakan jasa dari situs yang menyediakan tool Favicon Generator. Silahkan anda kunjungi http://www.favicongenerator.com
3. Setelah berada di situs tersebut klik Browse kemudian anda masukan gambar yang telah disiapkan tadi.
4. Klik Generate Favicon.
5. Setelah proses selesai, klik pada Click Here to Download your favicon.
6. Simpan pada komputer anda.
7. Uploadlah gambar favicon tadi ke situs untuk penyimpanan gambar.
8. Setelah proses upload selesai. copy kode HTML-nya dan simpan pada notepad.
9. Selanjutnya anda login ke Blogger
10. Pilih Tata Letak
11. Pilih Edit HTML
Cari kode kemudian simpan kode favicon tadi tepat diatasnya.
Untuk mempermudah anda, klik menu edit (diatas) pilih Find kemudian masukan kode . Klik Find Next, maka anda akan dibawa ke kode yang kita cari tadi.
Klik Simpan Template.
12. Selesai.
Lihat penampilan blog anda sekarang.
Read More..

02 Juni 2009

Best Keyboard Shortcuts

0 komentar
Getting used to using your keyboard exclusively and leaving your mouse behind will make you much more efficient at performing any task on any Windows system. I use the following keyboard shortcuts every day:
Windows key + R = Run menu
This is usually followed by:
cmd = Command Prompt
iexplore + "web address" = Internet Explorer
compmgmt.msc = Computer Management
dhcpmgmt.msc = DHCP Management
dnsmgmt.msc = DNS Management
services.msc = Services
eventvwr = Event Viewer
dsa.msc = Active Directory Users and Computers
dssite.msc = Active Directory Sites and Services
devmgmt.msc = Device Manager
msinfo32 = System Information
cleanmgr = Disk Cleanup
ntbackup = Backup or Restore Wizard (Windows Backup Utility)
mmc = Microsoft Management Console
excel = Microsoft Excel (If Installed)
msaccess = Microsoft Access (If Installed)
powerpnt = Microsoft PowerPoint (If Installed)
winword = Microsoft Word (If Installed)
frontpg = Microsoft FrontPage (If Installed)
notepad = Notepad
wordpad = WordPad
calc = Calculator
msmsgs = Windows Messenger
mspaint = Microsoft Paint
wmplayer = Windows Media Player
rstrui = System Restore
netscp6 = Netscape 6.x
netscp = Netscape 7.x
netscape = Netscape 4.x
waol = America Online
control = Opens the Control Panel
control printers = Opens the Printers Dialog

Windows key + E = Explorer
ALT + Tab = Switch between windows
ALT, Space, X = Maximize window
CTRL + Shift + Esc = Task Manager
Windows key + Break = System properties
Windows key + F = Search
Windows key + D = Hide/Display all windows
CTRL + C = copy
CTRL + X = cut
CTRL + V = paste
Display the System Properties dialog box. WIN Key+BREAK
Show the desktop. WIN Key+D
Minimize all windows. WIN Key+M
Restores minimized windows. WIN Key+Shift+M
Open My Computer. WIN Key+E
Search for a file or folder. WIN Key+F
Search for computers. CTRL+WIN Key+F
Display Windows Help. WIN Key+F1
Lock your computer if you are connected to a network domain, or switch users if you are not connected to a network domain. WIN Key+ L
Open the Run dialog box. WIN Key+R
Open Utility Manager. WIN Key+U

accessibility keyboard shortcuts:
Switch FilterKeys on and off. Right SHIFT for eight seconds
Switch High Contrast on and off. Left ALT+left SHIFT+PRINT SCREEN
Switch MouseKeys on and off. Left ALT +left SHIFT +NUM LOCK
Switch StickyKeys on and off. SHIFT five times
Switch ToggleKeys on and off. NUM LOCK for five seconds
Open Utility Manager. WIN Key+U

shortcuts you can use with Windows Explorer:
Display the bottom of the active window. END
Display the top of the active window. HOME
Display all subfolders under the selected folder. NUM LOCK+ASTERISK on numeric keypad (*)
Display the contents of the selected folder. NUM LOCK+PLUS SIGN on numeric keypad (+)
Collapse the selected folder. NUM LOCK+MINUS SIGN on numeric keypad (-)
Collapse current selection if it's expanded, or select parent folder. LEFT ARROW
Display current selection if it's collapsed, or select first subfolder. RIGHT ARROW
Read More..

29 Mei 2009

Speed Up Your Network and Internet Access

1 komentar
Increasing network browsing speed
Does your computer slow down when you browse your local area network and connect to other computers that are sharing data? One of the most common causes of this slowdown is a feature of Windows Explorer that looks for scheduled tasks on remote computers. This effort can take some time on some computers and can really slow down your browsing. The window with which you are browsing the network may appear to freeze momentarily, as the system is waiting for a response from the remote computer.

Windows XP: Speeding Disk Access
Although this problem is a complex one, the solution is very simple. Instead of having to wait for the remote scheduled tasks, which is useless information to anyone who is not a system administrator remotely configuring scheduled tasks, you can disable this feature.
In order to do this, you will have to change the System Registry and delete a reference to a key so that this feature will not be loaded. To do this, follow these steps:
  1. Open up the Registry Editor by clicking the Start Menu and selecting Run. Then type regedit in the text box and click the OK button.
  2. Once the Registry Editor has loaded, expand the HKEY_LOCAL_MACHINE key.
  3. Next, expand Software and then Microsoft.
  4. Locate Windows and expand that as well.
  5. You will want to be editing the main system files, so expand CurrentVersion.
  6. Because this feature is a feature of the Windows component known as Explorer, expand the Explorer key.
  7. Next, you will want to modify the remote computer settings, so expand the RemoteComputer key and then expand the NameSpace key to show all of the features that are enabled when you browse to a remote computer.
  8. In the NameSpace folder you will find two entries. One is "{2227A280-3AEA-1069-A2DE-08002B30309D}" which tells Explorer to show printers shared on the remote machine. The other, "{D6277990-4C6A-11CF-8D87-00AA0060F5BF}," tells Explorer to show remote scheduled tasks. This is the one that you should delete. This can be done by right-clicking the name of the key and selecting Delete.
Read More..

Use your Windows Key

0 komentar
The Windows logo key, located in the bottom row of most computer keyboards is a little-used treasure. Don''t ignore it. It is the shortcut anchor for the following commands:
  1. Windows: Display the Start menu
  2. Windows + D: Minimize or restore all windows
  3. Windows + E: Display Windows Explorer
  4. Windows + F: Display Search for files
  5. Windows + Ctrl + F: Display Search for computer
  6. Windows + F1: Display Help and Support Center
  7. Windows + R: Display Run dialog box
  8. Windows + break: Display System Properties dialog box
  9. Windows + shift + M: Undo minimize all windows
  10. Windows + L: Lock the workstation
  11. Windows + U: Open Utility Manager
  12. Windows + Q: Quick switching of users (Powertoys only)
  13. Windows + Q: Hold Windows Key, then tap Q to scroll thru the different users on your pc
Read More..

28 Mei 2009

Adding Alexa Widged in Blogger Gatget

0 komentar
Below tutorial Adding Alexa Widged in Blogger Gatget
There are few simple step to do this
  1. Click http://www.alexa.com/site/site_stats/signup
  2. Choose widget
  3. Copy the generate code in our new HTML/Javascript Gadget
  4. Paste in Blogger's HTML or Javascript Gadget
  5. Done.. View Blog..
Read More..

27 Mei 2009

Speed Up Browsing with DNS Catch

0 komentar
When you connect to a web site your computer sends information back and forth, this is obvious. Some of this information deals with resolving the site name to an IP address, the stuff that tcp/ip really deals with, not words. This is DNS information and is used so that you will not need to ask for the site location each and every time you visit the site. Although WinXP and win2000 has a pretty efficient DNS cache, you can increase its overall performance by increasing its size. You can do this with the registry entries below:
************begin copy and paste***********
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters]
"CacheHashTableBucketSize"=dword:00000001
"CacheHashTableSize"=dword:00000180
"MaxCacheEntryTtlLimit"=dword:0000fa00
"MaxSOACacheEntryTtlLimit"=dword:0000012d
************end copy and paste***********
make a new text file and rename it to dnscache.reg. Then copy and paste the above into it and save it. Then merge it into the registry.

Read More..

Removing Username in the Start Menu

0 komentar
Open Registry Editor Then Go To : "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer".
On The Right, Make A New Entry With Right Click On Your Mouse Then Choose "New | DWORD Value" Change The Entry's Name Into "NoUserNameInStartMenu", Double Click In The New Entry And Fill The "Value Data" With "1". Press OK, Exit From The Registry Editor. Restart Your Computer.
Read More..

Unlimited Rapidshare Downloads

0 komentar
Its very easy to fool Rapid Share server if your IP address is assigned by your ISP. Just follow these simple steps:

clean up IE or netscape cookie( In this case the one that belong to rapidshare website)
On Command prompt
type -----> ipconfig /flushdns <---Enter
type -----> ipconfig /release <---Enter
type -----> ipconfig /renew <---Enter
type -----> exit <--------Enter

Or save these commands in a bat file and run it everytime you need to fool Rapidshare server.Remember to clean up rapidshare cookie in your temp Internet files folder.

Now you should be ready to download as many files as you want from their server.

And there is this cool link: paste it in the browser and see
CODE
http://www.google.com/search?lr=&as_qdr=all&q=+.rar+OR+.zip+OR+.pdf+OR+.exe+site%3Arapidshare.de

Read More..

01 Mei 2009

Login root pada Fedora 10

0 komentar
Tingkat keamanan pada fedora 10 ternyata jauh lebih tinggi daripada fedora yang telah dirilis sebelumnya. Pada fedora 8 jika kita hendak login sebagai root kita "hanya" dikatakan "bodoh", tetapi pada fedora 10 jika kita login sebagai root malahan dikatakan tidak terautentikasi. Namun jika kita benar-benar "butuh" login sebagai root pada fedora kita, terdapat cara untuk mengatasinya, yaitu:
Kita masuk dengan menggunakan user biasa terlebih dahulu. Kemudian dari terminal ketik:
# su - untuk pindah user sebagai root, lalu ketik:
# vi /etc/pam.d/gdm
lalu tekan tombol 'shift' + ‘A’ keyboard untuk mengedit. Perhatikan pada baris:
auth required pam_succeed_if.so user != root quiet
hapus kode “user != root” (yang bercetak tebal). Lalu tekan ESC kemudian :wq untuk save dan keluar dari vim. lalu relogin (CTRL+ALT+BACKSPACE).
Sekarang kita sudah bisa login dengan menggunakan root. Selamat mencoba.:)
Read More..
 

Meindra's Blog Copyright © 2008 Black Brown Art Template by Ipiet's Blogger Template